Skip to content.

Superior Frontal Gyrus

Please be a precise as possible with times completed
Also, make sure you're putting the right info in the right column...
Case # Initials Date Hrs/Case Notes cleanup SFG/MFG
1005 JD SM 8/3 8/3 3 4.5  
1022 JD SM 8/4 8/7 3 3  
1026 JD SM 8/5 8/7 3 3  
1039 JD SM 8/6 8/8 2.5 3  
1059 JD SM 8/7 8/8 2.5 2.25  
1086 JD SM 8/10 8/9 2.5 3  
 
1037 JD 8/30 1.5   no file
1069 JD 8/9 2.5 MM JD
1091 JD 8/21 2.5 right side too large... done 8/28 JD
1096 JD 8/22 2.5 MM no file
1098 JD 8/23 2.5 MM JD
1100 JD 8/23 1.5 MM JD
1109 JD 8/24 2.5 MM JD
1110 JD 8/24 2 MM JD
1116 JD 8/24 1.5 right side superior frontal sulcus clean up & goes beyond precentral sulcus... done 8/28 JD
1121 JD 8/28 2.5   JD
1146 JD 8/29 2.5   JD
1147 JD 8/29 1.5   JD not sure about the inferior border
1151 JD 8/29 1.5 ..not sure which sulcus to follow on the left hemi  
1153 JD 8/31 2   JD
1158 JD 8/31 2   JD
1159 JD 8/31 2   JD.. not sure about right hem division
1165 JD 9/1 1.5   JD
1175 JD 9/1 1.5   JD
1193 JD 9/1 2   JD
1203 JD 9/1 1.2   left hem done
1216 JD 9/5 1.2    
1217 JD 9/5 1.2    
1218 JD 9/5 1    
1220 JD 9/5 1    
1229 JD 9/6 1    
1232 JD 9/6 1.2    
1234 JD 9/6 1.5    
1236 JD 9/7 1.2    
1243 JD 9/7 1 so far part of the left hem is unclear  
1246 JD 9/11 1.5 some skull remaining  
 
1248 SM 8/22 2.5 MM 9/12 Right inferior portion of mfg needs to go further medially
1259 SM 8/22 2 both hems need to go further posteriorly- edits complete 8/28 9/12 1.5 hr
1265 SM 8/23 1.67 both hems need to go further posteriorly- edits complete 8/28 9/13 1 hr
1275 SM 8/23 2.25 left okay, right needs to go further posteriorly- edits complete 8/28 9/13 1 hr
1288 SM 8/24 1.5 left okay, right needs to go further posteriorly- edits complete 8/28 9/13 1 hr
1292 SM 8/24 1.8 MM 9/28 1.3, Left MFG needs to go more medially at one spot towards the posterior end
1295 SM 8/24 1.3 MM 9/28 1hr
1296 SM 8/28 1.5   9/28 1 hr, Left mfg needs to go more medially at the posterior ending and on the inferior portion
1338 SM 8/28 1.3   9/29 1 hr
1340 SM 8/29 1.3   9/29 .75 hr
1356 SM 8/29 1.17   10/02 .5 hr
1367 SM 8/30 1.3   10/02 .5 hr
1371     problem with file  
1376 SM 8/30 1.5   10/02 .5 hr
1391 SM 8/30 1.17   10/02 .5 hr
1406 SM 8/31 1.25   10/04 .5 hr
1422 SM 8/31 1.5   10/04 .5 hr
1427 SM 8/31 1 not sure about posterior ending 10/04 .5 hr
1430 SM 9/05 1.5   10/04 .3 hr
1436 SM 9/05 1   10/06 .6 hr
1438 SM 9/06 1.5   10/06 .5 hr
1446 SM 9/07 1   10/06 .5 hr
1450 SM 9/06 1.2   10/06 .5 hr, MFG needs to go further medially on inferior surface
1459 SM 9/06 1.17   10/06 .5 hr
1468 SM 9/06 1.5   10/06 .5 hr
1476 SM 9/07 1.17   10/06 .5 hr
1487 SM 9/07 1.5   10/06 1 hr
1489 SM 9/07 1   10/06 .5 hr
1498 SM 9/07 1   10/06 .5 hr, mfg needs to go further medially at the superior posterior ending

Go Back